The mine loader needs careful maintenance in order to work longer and more effectively. Let's see how to maintain it together with Xiaobian:

常洗澡，散热好为了确实保证整机的冷却系统效能良好，应对冷却系统的各个部件进行彻底的清理、紧固和润滑，尽可能的清理冷却系统水垢，以提高散热效能，保持冷却系统畅通和加速冷却水的循环。

Take a bath frequently and dissipate heat well. In order to ensure the good efficiency of the cooling system of the whole machine, all components of the cooling system shall be thoroughly cleaned, fastened and lubricated, and the scale of the cooling system shall be cleaned as much as possible, so as to improve the heat dissipation efficiency, keep the cooling system unblocked and accelerate the circulation of cooling water.

及时更换水泵风扇传送皮带检查水泵的风扇传动皮带，皮带长期使用后，会产生疲劳、变形，降低冷却效果。皮带更换时，要注意型号和长度，并正确调整其松紧度。

Replace the water pump fan transmission belt in time and check the fan transmission belt of the water pump. After long-term use, the belt will produce fatigue and deformation and reduce the cooling effect. When replacing the belt, pay attention to the model and length, and correctly adjust its tightness.

经常检查水箱，保持足量冷却液检查水箱连接胶管有无破裂和漏水现象，避免影响供水量，同时要保持足量的冷却水，发现不足要及时添加。

Regularly check the water tank and maintain sufficient coolant. Check whether the connecting hose of the water tank is broken and leaking to avoid affecting the water supply. At the same time, maintain sufficient cooling water and add it in time if it is insufficient.

时刻关注水温表为保证整机的正确使用，要时刻注意水温表的读数，达到90°以上时必须采取措施。可选择就近的阴凉处停车并以怠速降温，注意不要即刻熄火，防止发动机内部过热而造成拉缸等事故。

Always pay attention to the water temperature gauge. In order to ensure the correct use of the whole machine, always pay attention to the reading of the water temperature gauge. Measures must be taken when it reaches more than 90 °. You can choose the nearest shady place to stop and cool down at idle speed. Be careful not to shut down immediately to prevent cylinder pulling and other accidents caused by overheating inside the engine.

润滑系统的性能检测要有针对性的对润滑系统的各个部件做一次性能检测，以使机油压力表、变速箱压力表指示准确。对变速箱、变距器和驱动桥内的油液进行一次系统的检查，并要保持油液清洁。

The performance test of the lubrication system shall be targeted to conduct one-time performance test on each component of the lubrication system, so as to make the indication of the oil pressure gauge and transmission pressure gauge accurate. Carry out a systematic inspection of the oil in the transmission, distance converter and drive axle, and keep the oil clean.

今天的矿用装载机http://www.kuangjingjixie.com/知识就分享到这里了，感谢您的浏览，请点击官网查看其他详细内容。

Today's mine loaders http://www.kuangjingjixie.com/ That's all for knowledge sharing. Thank you for browsing. Please click the official website to view other details.