服务热线电话If the water tank of our small loader has a problem, it will affect our application. Therefore, timely maintenance is the key to solve the problem. How should we repair it? Now let's take a look at the following suggestions.
第 一步大家需要做的是查验，查验小型装载机配件的水箱的水位时，发动机需要先歇火，而且等候发动机和水箱冷却了以后再进行检查，我们应该查验副水箱的水位，可是一般情况下，大家不要打开水箱盖。
The first step is to check the water level of the water tank of the small loader accessories. When checking the water level of the water tank, the engine needs to shut down and wait for the engine and water tank to cool before checking. We should check the water level of the auxiliary water tank, but generally, you should not open the water tank cap.
接下来，要是没有副水箱，那么我们就务必取出水箱盖，而且要遵循以下操作指南。
Next, if there is no auxiliary water tank, we must take out the water tank cover and follow the following operation guidelines.
然后我们来看看水箱水位降低后的水位，也就是把手靠近发动机和水箱检查周围的空气温度，但是我们不能用手触摸发动机和水箱。
Then let's take a look at the water level after the water level in the water tank drops, that is, the hand is close to the engine and water tank to check the ambient air temperature, but we can't touch the engine and water tank with our hands.
就要松脱水箱盖给里边的水缓解压力，然后慢慢地取出水箱盖就可以了。
Just loosen the water tank cover to relieve the pressure of the water inside, and then slowly take out the water tank cover.
就小型装载机的油耗而言一定是单缸比双缸低点，而且我们在选购小型装载机还要考虑到经济性，整车的构造是比较耐用的，因此大家购买小型装载机时凯兴机械的小编提几点建议。
As far as the fuel consumption of small loaders is concerned, it must be lower for single cylinder than for double cylinder. In addition, we should also consider the economy when purchasing small loaders. The structure of the whole vehicle is relatively durable. Therefore, when purchasing small loaders, we put forward some suggestions for Kaixing Machinery.
大家购买小型装载机发动机，单缸发动机连接都是靠皮带连的，并且在旧车后的启动跟离合应用上也会给我们带来一点不便，尤其是我们的小型装载机的离合很容易产生难题，因此小编建议大家选晋工小型装载机压盘式离合这样的话发动机就只能选双缸及以上的了变速器一般都是脚踏式，含有高底速这个基本不用考虑全车刚架结构看着牢固也就可以了像以上讲的在新车价位跟使用者的舒适感及往后的检修成本而言，是比较经济应用的像全压的来说尽管方便使用但往后的检修成本很高，并且在小型装载机性能层面我个人觉得很不稳定，容易产生难题。
First of all, we buy small loader engines. Single cylinder engines are connected by belts, and it will also bring us a little inconvenience in the starting and clutch applications of old cars. In particular, the clutch of our small loader is easy to cause problems. Therefore, I suggest you choose the pressure plate clutch of small loader. In this way, we can only choose double cylinder and above engines. Generally, the transmission is pedal type, With high bottom speed, it is not necessary to consider that the rigid frame structure of the whole vehicle looks firm. As mentioned above, the new car price, the user's comfort and the future maintenance cost are relatively economical. As for full pressure, although it is convenient to use, the future maintenance cost is very high. In addition, I personally think that the performance of small loaders is very unstable and easy to cause problems.
以上就是为大家介绍的有关矿用装载机的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.kuangjingjixie.com
The above is a detailed introduction to the mining loader, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://www.kuangjingjixie.com
