Mine forklift mine loader small loader roadway forklift design new cab to make the operating environment. This model is equipped with wide and tires, and the service life of the tires is 3 times longer than that of other loaders of the same model. Underground loader is used in mines, municipal maintenance and construction sites. It is a kind of engineering machinery.

1.矿井装载机采用临工、成熟配套体系电器元件，电器系统稳定。

1. The mine loader adopts temporary and mature supporting system electrical components, and the electrical system is stable.

2.采用矿用铲车加重型变矩器和驱动桥，增加了整机的。

2. Mining forklift, heavy torque converter and drive axle are adopted to increase the reliability of the whole machine.

3.矿井铲车采用临工、成熟配套体系电器元件，电器系统稳定。

3. The mine forklift adopts temporary and mature supporting system electrical components, and the electrical system is stable.

4.桥轮距窄半轴相对短，了车子的扭矩，了车子的掘进力工作效率，大大了桥的损坏率。

4. The narrow wheel base of the bridge and the relatively short half axle increase the torque of the vehicle, the driving force and working efficiency of the vehicle, and greatly reduce the damage rate of the bridge.

5.本机窄的轮距，能通过的人工巷道。

5. The machine has narrow wheel base and can pass through artificial roadway.

6.矿用铲车在原车的基础上增加了尾气净化设备，操作活，尾气净化率达到，。

6. The mine forklift has added tail gas purification equipment on the basis of the original vehicle, with flexible operation, tail gas purification rate, energy conservation and environmental protection.

1、矿井装载机环视车辆检查是否存在漏油、漏水现象，轮胎气压是否正常，螺丝是否松动。铲斗销；大臂销；液压销及其锁紧螺母是否脱落。

1. The mine loader looks around the vehicle to check whether there is oil and water leakage, whether the tire pressure is normal and whether the screws are loose. Bucket pin; Boom pin; Check whether the hydraulic pin and its lock nut fall off.

2、装载机矿用装载机待机构，采用五叶片不等角风扇，冷却系统采用铝制散热器，散热面积大，优化整个冷却系统的进出风道设计，降低发动机水温和液压系统的油温，热平衡温度更低，提高了整机冷却效率，可以适应更高工作环境温度。*160;

2. The waiting mechanism of the mine loader of the loader adopts a five blade unequal angle fan, and the cooling system adopts an aluminum radiator with large heat dissipation area. It optimizes the inlet and outlet air duct design of the whole cooling system, reduces the engine water temperature and the oil temperature of the hydraulic system, and the heat balance temperature is lower, which improves the cooling efficiency of the whole machine and can adapt to higher working environment temperature* 160;

3.矿井装载机采用液力整体变矩器，可靠性高，维修方便；操作轻便、迅速、预热3~5分钟后抬臂收斗做舒展运动，听各连接销是否存在因缺油所导致的异响。

3. The mine loader adopts hydraulic integral torque converter with high reliability and convenient maintenance; The operation is light and rapid. After preheating for 3 ~ 5 minutes, lift the arm and retract the bucket for stretching movement, and listen to whether there is abnormal noise caused by lack of oil in each connecting pin.

4.可拆卸驾驶棚，视野宽阔，为操作者提供良好的工作条件。

4. The detachable driving shed has a wide field of vision and provides good working conditions for the operator.

矿井装载机检查发动机机油；发动机冷却水箱水位；液压油；变矩器油；方向机油；刹车油是否正常。风扇皮带松紧度（手指压皮带；下垂0.5~1.0厘米为正常）。

Check engine oil of mine loader; Water level of engine cooling water tank; Hydraulic oil; Torque converter oil; Directional oil; Check whether the brake oil is normal. Tightness of fan belt (press the belt with your fingers; it is normal if it sags by 0.5 ~ 1.0 cm).

1.矿井装载机采用临工、成熟配套体系电器元件，电器系统稳定。

1. The mine loader adopts temporary and mature supporting system electrical components, and the electrical system is stable.

2.采用矿用铲车加重型变矩器和驱动桥，增加了整机的。

2. Mining forklift, heavy torque converter and drive axle are adopted to increase the reliability of the whole machine.

3.矿井铲车采用临工、成熟配套体系电器元件，电器系统稳定。

3. The mine forklift adopts temporary and mature supporting system electrical components, and the electrical system is stable.

4.桥轮距窄半轴相对短，了车子的扭矩，了车子的掘进力工作效率，大大了桥的损坏率。

4. The narrow wheel base of the bridge and the relatively short half axle increase the torque of the vehicle, the driving force and working efficiency of the vehicle, and greatly reduce the damage rate of the bridge.

5.本机窄的轮距，能通过的人工巷道。

5. The machine has narrow wheel base and can pass through artificial roadway.

6.矿井铲车在原车的基础上增加了尾气净化设备，操作活，尾气净化率达到，。

6. The mine forklift has added tail gas purification equipment on the basis of the original vehicle, which can operate flexibly, achieve the tail gas purification rate, save energy and protect the environment.

矿井装载机巷道铲车的使用环境条件：

Operating environmental conditions of mine loader roadway forklift:

1.巷道坡度不大于15°；

1. The roadway slope shall not be greater than 15 °;

2.使用地点海拔不过1000m，在海拔过1000m的高原环境下使用时，应根据情况采取的措施或进行设计；

2. The altitude of the place of use is less than 1000m. When it is used in the plateau environment with an altitude of more than 1000m, measures or design shall be taken according to the situation;

1、操作矿井装载机的操作人员在进行驾驶与作业之前，应熟知巷道装载机的各种性能、结构、技术保养、操作方法、并按规定进行操作。

1. Before driving and operating the mine loader, the operator shall be familiar with various performance, structure, technical maintenance and operation methods of the roadway loader and operate according to the regulations.

2、除驾驶室外，机上其他地方严禁乘人。

2. Except the cab, passengers are strictly prohibited in other places on the machine.

3、工作时，铲臂下面严禁站人，禁止铲斗载人，禁止无关人员在施工正前方站力，禁止其他机械在此工作和通行。

3. During operation, it is strictly prohibited to stand under the shovel arm, the bucket to carry people, irrelevant personnel to stand in front of the construction, and other machinery to work and pass here.

4、矿井装载机采用了加重型变矩器和驱动桥，增加了整机的可靠性。

4. The mine loader adopts heavy torque converter and drive axle, which increases the reliability of the whole machine.

5、采用铰接式结构，转弯半径小，转向灵活。超窄的轮距可通过狭小的人工巷道。

5. Articulated structure is adopted, with small turning radius and flexible steering. Ultra narrow track can pass through narrow artificial roadway.

6、发动机采用的是矿山型，动力强劲，噪音低，功率大。特别能适应井下环境。

6. The engine is mine type, with strong power, low noise and high power. Especially suitable for underground environment.

矿井装载机巷道装载机井下装载机矿用轮式装载机是本公司在轮式装载机的基础上，采用马力强劲、动力可靠的4105/4102发动机；尾气经过优化水处理，降低温度、黑烟、异味，用于（矿）井下进行铲装作业产品；整机高度低，卸载高度低于2米；电器系统容量大，启动、照明充足，是一款、经济、可靠的又一代产品；其性能指标均达到或超过和行业标准要求。

Mine loader roadway loader underground loader mine wheel loader is a 4105 / 4102 engine with strong horsepower and reliable power based on the wheel loader of the company; The tail gas is optimized for water treatment to reduce temperature, black smoke and peculiar smell, and is used for shoveling and loading products underground (mine); The height of the whole machine is low, and the unloading height is less than 2m; The electrical system has large capacity and sufficient start-up and lighting. It is a, economical and reliable next-generation product; Its performance indexes meet or exceed the requirements of national and industrial standards.

矿井装载机操作标准规程底盘采用铰接式结构，转弯半径小，转向灵活，适用于狭小空间作业.

The chassis of mine loader adopts articulated structure, with small turning radius and flexible turning, which is suitable for operation in narrow space

本文由矿井装载机为您提供，我们的网站是：http://www.kuangjingjixie.com我们将以全心全意的热情为您提供服务，欢迎您的访问！

This article is provided by the mine loader. Our website is: http://www.kuangjingjixie.com We will serve you with wholehearted enthusiasm. Welcome to visit!