山汽矿井车设备

  • 服务热线:

    15065707252

当前位置:首页 > 新闻中心 > 行业新闻

新闻中心

服务热线电话

15065707252

井下装载机的使用措施有哪些?

来源:http://www.kuangjingjixie.com/ 发布时间:2021-12-22 浏览次数:0

内容详情:
井下装载机是一种广泛用于公路、铁路、矿山等建设工程的土石方施工机械,它主要用于铲装土壤、砂石、石灰、煤炭等散状物料,也可对矿石、硬土等作轻度铲挖作业。为了更好的使用井下装载机,它在作业时需要注意什么措施呢?
Underground loader is a kind of earthwork construction machinery widely used in highway, railway, mine and other construction projects. It is mainly used to shovel soil, sand, lime, coal and other bulk materials. It can also be used for light shovel excavation of ore and hard soil. In order to better use the underground loader, what measures should be paid attention to during operation?
驾驶员及有关人员在使用井下装载机之前,认真仔细地阅读制造企业随机提供的使用维护说明书或操作维护保养手册,按资料规定的事项去做。否则会带来严重重果和不必要的损失。驾驶员穿戴应符合要求,并穿载必要的防护设施。
Before using the underground loader, the driver and relevant personnel shall carefully read the operation and maintenance manual or operation and maintenance manual provided by the manufacturer and do it according to the matters specified in the data. Otherwise, it will bring serious consequences and unnecessary losses. The driver's wear shall meet the requirements and wear necessary protective facilities.
在作业区域范围较小或危险区域,则在其范围内或危险点显示出警告标志。严禁驾驶员酒后或过度疲劳驾驶作业。在铰接区内进行维修或检查作业时,要装上防转动杆以防止前、后车架相对转动。
If the operation area is small or dangerous, warning signs shall be displayed within its scope or dangerous points. It is strictly prohibited for drivers to drive after drinking or excessive fatigue. When carrying out maintenance or inspection in the articulated area, install the anti rotation rod to prevent the relative rotation of the front and rear frames.
在装载机高速行驶时用前两轮驱动,低速铲装用四轮驱动。行驶中换档不必停车,也不必踩制动踏板。由低速变高速时先松一下油门同时操作变速杆,然后再踩一下油门;由高速换低速时则加大油门,使变速器输出轴与转动轴转速一致。
When the loader runs at high speed, it is driven by the first two wheels, and when the shovel is loaded at low speed, it is driven by four wheels. There is no need to stop or step on the brake pedal when shifting during driving. When changing from low speed to high speed, first release the accelerator, operate the shift lever at the same time, and then step on the accelerator; When changing from high speed to low speed, increase the throttle to make the speed of transmission output shaft consistent with that of rotating shaft.
需要注意的是,在装载机停稳之后,在有蹬梯扶手的地方上下装载机。切勿在装载机作业或行走时跳上跳下。维修装载机需要举臂时,要把举起的动臂垫牢,保证在任何维修情况下,动臂不会落下。
It should be noted that after the loader stops stably, get on and off the loader at the place with ladder handrail. Do not jump up and down when the loader is working or walking. When the loader needs to be lifted for maintenance, the lifted boom shall be padded firmly to ensure that the boom will not fall under any maintenance condition.
.以上就是井下装载机http://www.kuangjingjixie.com为大家介绍的内容,感谢您在百忙之中查看我公司的信息内容,如果您想要了解的更多,欢迎您来电进行咨询!
. The above is the underground loader http://www.kuangjingjixie.com Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation!