The advantages of mechanized construction are becoming more and more obvious. Now more and more industries pursue higher efficiency, which puts forward higher requirements for the industrial equipment production industry. Underground operation is also gradually developing towards mechanization, and the types of mechanical equipment matching it are increasing, which plays a very obvious role in improving underground work efficiency.

井下装载机的应用环境比较特殊，不仅对其机械结构组件有非常大的挑战性，在电缆敷设上更有着多重考量。为使卷筒与电动机间的电缆在卷筒转动过程中不出现相对运动，在卷筒内设计电刷和滑环，这一装置在一定情况下可能会产生火花，当空气中含有一定浓度的瓦斯时，就会燃烧或爆炸，所以卷筒要具有耐爆性和不传爆性的。

The application environment of underground loader is special, which not only poses a great challenge to its mechanical structure components, but also has multiple considerations in cable laying. In order to prevent the relative movement of the cable between the drum and the motor during the rotation of the drum, the brush and slip ring are designed in the drum. This device may produce sparks under certain circumstances. When the air contains a certain concentration of gas, it will burn or explode. Therefore, the drum must have explosion resistance and non explosion transmission.

耐爆性是指卷筒外壳的强度，当卷筒内部发生爆炸时，应使其不发生变形和损坏，不能出现火焰直接点燃矿井中的瓦斯混合物情况，从而达到耐爆的要求，它是由外壳的材质和机械结构强度来保证的。

Explosion resistance refers to the strength of the drum shell. In case of explosion inside the drum, it shall not be deformed and damaged, and the flame can not directly ignite the gas mixture in the mine, so as to meet the requirements of explosion resistance. It is guaranteed by the material and mechanical structure strength of the shell.

根据材料力学及实验的结果，对于钢板外壳，理论上厚度为3～4mm，铸铁为6mm。不传爆性是指甲烷与空气混合物在内部发生爆炸时，火花不会传到壳体的外部，因而也就不会引起壳外可燃气体的爆炸，这一点可通过外壳装配接合面的宽度L、临界间隙dkp和加工表面精度来做好保证。

According to the results of material mechanics and experiment, the theoretical thickness of steel plate shell is 3 ~ 4mm and cast iron is 6mm. Non explosive property means that when the mixture of methane and air explodes inside, the spark will not be transmitted to the outside of the shell, so it will not cause the explosion of combustible gas outside the shell. This can be guaranteed by the width l of the shell assembly joint surface, the critical gap DKP and the machining surface accuracy.

机械设备的结构特点及材质选择应该符合实际应用场所的环境特点，更要结合工作要求来保障设备使用。

The structural characteristics and material selection of mechanical equipment should conform to the environmental characteristics of the actual application site, and should be combined with the work requirements to ensure the use of the equipment.

以上就是井下装载机http://www.kuangjingjixie.com为大家介绍的内容，感谢您在百忙之中查看我公司的信息内容，如果您想要了解的更多，欢迎您来电进行咨询!

The above is the underground loader http://www.kuangjingjixie.com Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to inquire!