When it comes to small loaders, I believe everyone is familiar with it. Under the rapid development of modern villages and towns, it is not difficult to find its presence as long as there is a place for construction. It is inevitable that various problems will occur when small loaders are used on a large scale. Among them, the internal leakage of steering cylinder is a thorny problem, which will lead to heavy steering of loaders. How can we judge whether the oil cylinder is leaking? The following editor will teach you:

1、拆卸与右转向油缸大腔相连的液压胶管和接头，把油管插在油桶里约3min，待缸头端余油不流动后重新打车，继续操作右转向，切记此时不能向左打转向，否则会造成拆掉的液压胶管喷油和方向失控，并观察右转向油缸大腔油口流油情况。

1. Remove the hydraulic hose and connector connected to the large chamber of the right steering cylinder, insert the oil pipe into the oil barrel for 3min, and then take a taxi again after the residual oil at the cylinder head end does not flow. Continue to operate the right steering. Remember not to turn to the left at this time, otherwise the oil injection and direction of the removed hydraulic hose will be out of control. Observe the oil flow at the oil port of the large chamber of the right steering cylinder.

2、测算油滴的时间，此时转向油路一直处于憋压状态，拆掉的胶管由于与转向器回油口相通持续有油流，这个过程约30-60秒即可。

2. Measure the time of oil drop. At this time, the steering oil circuit is always in a pressure holding state. Since the removed rubber hose is connected with the oil return port of the steering gear, there is continuous oil flow. This process takes about 30-60 seconds.

以上就是为大家介绍的矿用装载机http://www.kuangjingjixie.com有关的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务.

The above is the mine loader introduced to you http://www.kuangjingjixie.com I hope that the detailed introduction to the will be helpful to you If you have any questions, please contact us We will provide you with professional service