What are the causes of oil contamination in loaders

新油中的污染物：虽然液压油是在比较清洁的环境条件下提炼加工而成的，但在运输和储存的过程中受到管道、油桶和储油罐的污染，油液中会混入一些灰尘、砂土、铁锈、水分和其它液体等。

Pollutants in new oil: Although hydraulic oil is refined and processed under relatively clean environmental conditions, it is polluted by pipelines, oil drums and storage tanks during transportation and storage, and some dust, sand, rust, water and other liquids will be mixed in the oil.

外界侵入污染物：液压元件以及机械工作过程中，由于油箱密封不完善，元件密封和防护装置损坏等原因，由系统外部侵入些污染物，如灰尘、砂土、水分等。

External invading pollutants: during the working process of hydraulic components and machinery, some pollutants, such as dust, sand, water, etc., are invaded from the outside of the system due to the imperfect sealing of the oil tank, the damage of the component seal and the protective device.

元件和系统中残留的污染物：液压元件和液压系统在加工、装配和清洗过程中会由于清理工作进行得不干净而残留一些污染物。

Residual pollutants in components and systems: during the processing, assembly and cleaning of hydraulic components and systems, some pollutants will be left due to unclean cleaning.

液压系统内部生成的污染物：液压系统在工作中自身会生成一些固态颗粒污染物，其中既有液压元件磨损和腐蚀而产生的金属颗粒或橡胶粉末，又有油液氧化产生的污染物等。

Pollutants generated in the hydraulic system: the hydraulic system will generate some solid particulate pollutants during its work, including metal particles or rubber powder generated by wear and corrosion of hydraulic components, and pollutants generated by oil oxidation.

设备液压泵的吸油口应安装粗滤器，且吸油口处应距油箱底部相应距离；出油口处应安装高压精滤器，且过滤效果应按照系统的工作要求，以免污物堵塞而引起液压系统故障；装载机的液压油箱隔板上应加装过滤网，以除去回油过滤器未滤去的杂质。

The oil suction port of the equipment hydraulic pump shall be installed with a coarse filter, and the oil suction port shall be at a corresponding distance from the bottom of the oil tank; A high-pressure fine filter shall be installed at the oil outlet, and the filtering effect shall be in accordance with the working requirements of the system, so as to prevent the hydraulic system from being blocked by dirt; A filter screen shall be installed on the partition plate of the hydraulic oil tank of the loader to remove the impurities not filtered by the oil return filter.

设备液压缸上应安装金属防护圈，以免污物被带进缸内，并可避免泥水和光辐射对液压缸侵蚀而引起泄漏；液压元器件安装前应检查、清理干净其内侧的铁屑及杂质；定期检查液压油，一旦发现油液变质、泡沫多、沉淀物多、油水分离等现象后应进行清洗系统并换油。

Metal protection ring shall be installed on the hydraulic cylinder of the equipment to prevent dirt from being brought into the cylinder and prevent leakage caused by erosion of mud and light radiation on the hydraulic cylinder; Before installation of hydraulic components, check and clean the iron chips and impurities inside; Check the hydraulic oil regularly. In case of oil deterioration, excessive foam, sediment and oil-water separation, clean the system and change the oil.

新油加入装载机的油箱前应经过静置沉淀，过滤后方可加入，需要时可设中间油箱以进行新油的沉淀和过滤，保障油液的清洁

Before adding new oil into the oil tank of the loader, it shall be subject to static sedimentation and filtration before adding. If necessary, an intermediate oil tank can be set to precipitate and filter the new oil to ensure the cleanness of the oil

以上就是为大家介绍的有关矿用装载机的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.kuangjingjixie.com

The above is the detailed introduction of the mining loader for you. I hope it will help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://www.kuangjingjixie.com