The mine loader is equipped with a crushing hammer. As we all know, the crushing hammer is installed on the excavator, but there will always be customers calling to inquire whether the mine loader can be equipped with a crushing hammer? Is it powerful!

破碎锤以矿用装载机为媒介，以我的工作经验彻 底能够加装，并且以前搞过很多台，说起怎么样用：，矿用装载机破碎锤功能强大，矿用装载机加装破碎锤都是加装的中小型号破碎锤，30装载机一般加装85MM的破碎锤，50装载机加装100毫米的破碎锤，并且都是直锤，破碎锤和矿用装载机中间也要订制联接架。

Taking the mining loader as the medium, the crushing hammer can be completely installed with my work experience, and I have done many sets before. How to use it: first, the crushing hammer of mining loader is powerful. The crushing hammer of mining loader is installed in small and medium-sized models. Generally, 85mm crushing hammer is installed on 30 loader and 100mm crushing hammer is installed on 50 loader, And they are all straight hammers. The connecting frame should also be customized between the crushing hammer and the mining loader.

此外，矿用装载机加装破碎锤花费高，管路包括一个大个儿的继电器因此破碎锤管路工程造价也比挖机的管路要贵出一倍上下，破碎工作时由于矿用装载机沒有360度转动作用。

In addition, it is expensive to install a crushing hammer on the mining loader, and the pipeline includes a large relay. Therefore, the engineering cost of the crushing hammer pipeline is twice as expensive as that of the excavator. During crushing, the mining loader does not rotate 360 degrees.

常常必 须破碎时调节视角，左摆右晃的，干活儿时还必 须一台矿用装载机相互配合，立即把破碎后的料清 除出来，便于下一轮破碎，矿用装载机配破碎锤由于视线好，破碎锤非常容易打，会造成破碎锤效率高，如果是暂时性或是活并不是许多能够考虑到，重要务必要在平地工作，自然环境务必符合条件！

It is often necessary to adjust the angle of view during crushing and swing left and right. When doing work, a mining loader must cooperate with each other to immediately remove the crushed materials for the next round of crushing. The mining loader is equipped with a crushing hammer. Due to good sight, the crushing hammer is very easy to hit, which will lead to high efficiency of the crushing hammer. If it is temporary or live, not many can be considered, It is important to work on flat ground, and the natural environment must meet the conditions!