The safety management of mine loader is an important part of machinery management, which involves the installation / removal, operation, maintenance, repair, accident handling and other aspects of machinery. The purpose of mechanical safety management is to take appropriate technical measures and organizational measures in the whole process of mechanical life cycle to eliminate all kinds of potential safety hazards, so as to protect machinery from damage, personnel from injury and environment from pollution.

机械安 全管理体系则有赖于机械监理之间的协调、配合和联动、互动。因此，应将关键点放在安 全规程修改和完善、患整改、人员安 全培训、安 全制度和措施的落实等方面。

The mechanical safety management system depends on the coordination, cooperation, linkage and interaction between mechanical supervisors. Therefore, the key points should be put on the modification and improvement of safety regulations, patient rectification, personnel safety training, implementation of safety systems and measures, etc.

建筑施工过程中，人员的流动性大，一线的生产工人大部分都知识缺乏等等。为了人的不安 全行为，就必 须加强对建筑机械操作人员的管理，坚持一定要持证上岗，按规操作。

In the process of construction, the mobility of personnel is large, most of the front-line production workers are lack of knowledge and so on. In order to eliminate people's unsafe behavior, it is necessary to strengthen the management of construction machinery operators, adhere to must have a certificate, operate according to regulations.

由于建筑机械的特殊性，大部分中小型建筑机械都是易于操作的，这就造成了部分人的思想麻痹，认为我也会操作，或者可以随便叫人去操作，未建立设备管理制度、设备管理技术档案和设备使用运行管理资料，未落实管理责任制。这就为生产埋下了隐患。

Due to the particularity of construction machinery, most small and medium-sized construction machinery are easy to operate, which has caused some people's ideological paralysis. They think I can also operate, or they can call people to operate at will. They have not established equipment safety management system, equipment management technical archives and equipment use operation management data, and have not implemented the safety management responsibility system. This has laid a hidden danger for safe production.

根据设备的性能状况、使用单位的管理水平将所有的设备评出优、良、一般、差4个不同等级，其中差和一般的列为重要监控对象，另外将整改通知单要求有整改事项的设备定为重要监控对象，加大检查的频率和监控力度，直整改合格；建立起与项目部、租赁单位的直接联系。

According to the performance status of the equipment and the management level of the user, all equipment will be rated as excellent, good, average and poor, of which the poor and average are listed as important monitoring objects. In addition, the equipment with rectification matters required in the rectification notice will be listed as important monitoring objects, and the inspection frequency and monitoring efforts will be increased until the rectification is qualified; Establish direct contact with project department and leasing unit.