Bucket as one of the common configuration of mine loader, only reasonable selection can improve the efficiency of machinery. Here we introduce several common buckets of loaders to see how they can help loaders complete different types of tasks:

副刃铲斗，具有用螺栓固定在主刃板底部的高耐磨副刃板，还可更换；能大大地减缓主刃板的磨损，不仅能提高装载机在工作时的效率，还能有用地延长铲斗的使用寿命。

The auxiliary blade bucket has a high wear-resistant auxiliary blade which is fixed at the bottom of the main blade with bolts and can be replaced; It can greatly reduce the wear of the main blade plate, not only improve the efficiency of the loader, but also extend the service life of the bucket.

相对于装齿的铲斗，副刃铲斗还可以有用保护地面。它可以用于港口、码头、煤场等松散物料的铲运、装卸、集料、场地的清理，也可适用于石料、沙场物料的装卸和商砼物料的上料工作。各种工况难题，迎“刃”而解。

Compared with the toothed bucket, the secondary blade bucket can also be used to protect the ground. It can be used for shoveling, loading and unloading of loose materials such as port, wharf and coal yard, cleaning of aggregate and site, loading and unloading of stone materials and sand yard materials, and loading and unloading of commercial concrete materials. All kinds of working conditions are difficult to solve.

侧卸斗可以实现正向作业和侧向作业，根据作业现场的要求，通过调整侧卸油缸实现不同侧卸料；副刃和斗体侧板采用高 强 度、高耐磨材料，更加适应岩 石等密实物料的铲装。

According to the requirements of the operation site, different side unloading can be realized by adjusting the side unloading cylinder; The auxiliary blade and the side plate of the bucket body are made of high-strength and wear-resistant materials, which are more suitable for the loading of dense materials such as rocks.

平刃岩 石斗主要用于矿山破裂后岩石的铲装、转运和原生土的铲挖。平直的主切削刃，并具有高耐磨副切削刃和斗齿，铲斗经过有限元分析和实际工况验证，具有强度高、耐磨的特点。

The flat blade rock bucket is mainly used for loading and transporting the broken rock and digging the original soil. The bucket has the characteristics of high strength and wear resistance after finite element analysis and actual working condition verification.

凸刃岩石斗与众不同的“V型”设计，让它从众多同类产品中脱颖而出。主切屑刃呈V型中间凸起，能够有用减少插入物料时的阻力！铲斗同时具有高耐磨斗和副切削刃，经过有限元分析和实况验证，具有高 强度、耐磨、耐冲击的特点。

The distinctive "V" design of convex blade rock bucket makes it stand out from many similar products. The main chip edge is V-shaped and convex in the middle, which can effectively reduce the resistance when inserting materials! The bucket has high wear resistance bucket and auxiliary cutting edge at the same time. Through finite element analysis and actual verification, it has the characteristics of high strength, wear resistance and impact resistance.