As we all know, new cars go through the running in period when they are in use. In order to ensure the stable operation of the loader in the future, mining loaders also need a running in period. What should be paid attention to in the running in period of the loader?

（1）由于装载机的特殊性，操作职工应接受厂家的训练、辅导，对机器的布局、机能有充足的认知及了解，并取得必定的操作及保护经验然后才可以操作机器。

(1) Due to the particularity of the loader, the operator shall receive training and guidance from the manufacturer, have sufficient knowledge and understanding of the layout and function of the machine, and obtain certain operation and protection experience before operating the machine.

（2）留心磨合期的作业负荷，磨合期内的作业负荷通常不可以超过额外作业负荷的百分之六十，并要铺排合适的作业量，避免机器长时间接连功课所致使的过热现场的发作。

(2) Pay attention to the operation load during the running in period. The operation load during the running in period can not exceed 60% of the additional operation load, and arrange an appropriate amount of operation to avoid the occurrence of overheating on the site caused by the continuous operation of the machine for a long time.

（3）注意并经常性查看各外表指示，装载机斗齿泛起反常要及时泊车予以扫除，在缘由未找到、毛病未扫除前应休止功课。留心常常查看光滑油、液压油、冷却液、制动液以及燃油油位和质量，并留心查看整机的密封性。查看中发现油水短少过多，应剖析缘由。

(3) Pay attention to and regularly check the appearance instructions. If the bucket teeth of the loader are abnormal, park the car in time to remove it. Stop your homework before the cause is not found and the problem is not removed. Pay attention to the oil level and quality of smooth oil, hydraulic oil, coolant, brake fluid and fuel, and pay attention to the tightness of the whole machine. It is found that there is too little oil and water during the inspection, and the reason should be analyzed.

（4）经常性的对矿用装载机进行清洗，及时调整、紧固松动的零部件以防因松动而加重零部件的磨损或致使零部件丢掉。与此同时，应强化各光滑点的光滑，主张在磨合期内，每班都要对光滑点加注光滑脂，当然如果是遇到有特殊要求的是可以除外的。

(4) The mine loader shall be cleaned regularly, and the loose parts shall be adjusted and fastened in time to prevent the wear of parts or loss of parts due to looseness. At the same time, the smoothness of each smooth point should be strengthened. It is advocated that during the running in period, each shift should add smooth grease to the smooth points, except for those with special requirements.

总之，装载机在磨合期内使用保养的要求可以归纳为：加强培训、减轻负荷、注意检查、强化润滑。只要重视并按要求对装载机实施磨合期的保养与维护，就会减少装载机早期故障的发生，延长使用寿命，提高作业效率。

In short, the requirements for the use and maintenance of loaders during the running in period can be summarized as follows: strengthening training, reducing load, paying attention to inspection and strengthening lubrication. As long as we pay attention to and implement the maintenance and repair of the loader during the running in period as required, it will reduce the occurrence of early faults of the loader, prolong the service life and improve the operation efficiency.

以上就是井下装载机http://www.kuangjingjixie.com为大家介绍的内容，感谢您在百忙之中查看我公司的信息内容，如果您想要了解的更多，欢迎您来电进行咨询!

The above is the underground loader http://www.kuangjingjixie.com Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation!