A good loader operator can clearly know how to use the machine, reduce the wear and tear of the machine, reduce the fuel consumption, and complete the operation well and quickly when driving the loader. Here are 6 tips to turn you into a good loader! Come and have a look.

1、轻

1. Light

在装载机作业时脚跟紧抵驾驭室地板，脚板和油门踏板坚持平行，轻缓地下压加油踏板。

During the operation of the loader, the heel tightly touches the floor of the driving room, the foot plate and the accelerator pedal adhere to be parallel, and gently press the refueling pedal.

2、稳

2. Stable

装载机在作业中，油门始终要稳住。通常作业状态下，油门开度在70~80%摆布为宜。

During the operation of the loader, the accelerator should always be stable. Under normal operating conditions, the throttle opening should be controlled at 70~80%.

3、离

3. From

在装载机作业时，脚板应和制动踏板分脱离，平放到驾驭室地板上，不要踩在制动踏板上。

During the operation of the loader, the foot plate shall be separated from the brake pedal, and placed flat on the floor of the driving room. Do not step on the brake pedal.

装载机常常在高低不平的工地作业，假如脚老是踩在制动踏板上，机身上下窜动会形成驾驭员不轻意地踩制动踏板。

Loaders often work on uneven construction sites. If your feet always step on the brake pedal, the body will move up and down, causing the driver to step on the brake pedal carelessly.

通常状况下，要用操控油门减速的办法操控机况和换档。

Normally, you need to control the engine condition and shift gears by controlling the accelerator to decelerate.

这么既防止了频频制动形成制动体系过热，又为装载机便利的提速带来便利。

This not only prevents the brake system from overheating due to frequent braking, but also brings convenience to the convenient speed increase of the loader.

4、勤

4. Diligence

在装载机作业时，特别是在铲挖作业时，应在油门安稳状况下，用循环扳动起升和转斗操作杆的办法使铲斗铲满物料。

During the operation of the loader, especially during the digging operation, the bucket shall be filled with materials by cyclically pulling the lifting and bucket turning operating levers under the condition of stable accelerator.

起升和转斗操作杠的循环扳动即是所说的“勤”。

Cyclic pulling of the lifting and bucket turning operating levers is called "diligence".

这个进程非常主要，对耗油量的影响很大。

This process is very important and has a great impact on fuel consumption.

5、和谐

5. Harmony

和谐即是起升和转斗操作缸的配合。装载机通常的铲挖进程首要是将铲斗平放在地面，平稳地驶向料堆。

Harmony is the cooperation between the lifting and bucket turning operation cylinders. The usual shovel digging process of loader is to lay the bucket flat on the ground and drive steadily to the stock pile.

在铲斗平行铲往料堆遇阻力时，首要应遵从先起臂后收斗的准则。

When the bucket is parallel to the material pile and encounters resistance, the principle of lifting the boom first and then retracting the bucket shall be followed.

这么可以有用地防止铲斗底部遭到阻力，然后可以充沛体现更大的掘起力。

This can effectively prevent the bucket bottom from being subjected to resistance, and then can fully reflect the greater digging force.

6、制止

6. Stop

首要是制止猛轰油门。装载机不管是在行走中或是在铲装的作业进程，都不要用力踩踏油门踏板，始终坚持油门操控的轻稳陡峭性。充沛的削减和下降操作中的人为毛病。

The first thing is to stop slamming the accelerator. No matter when the loader is walking or in the process of shovel loading, do not step on the accelerator pedal vigorously, and always adhere to the light, stable and steep nature of the accelerator control. Abundant reduction and artificial faults in lowering operation.

其次是制止轮胎打滑。装载机作业时，遇阻力而猛加油门往往会呈现轮胎打滑的表象。这种表象通常是因为驾驭员操作不妥形成的，既增加了油耗又损伤了轮胎。

The second is to stop the tire slipping. When the loader is operating, when encountering resistance, the sudden refueling door often presents the appearance of tire slipping. This appearance is usually caused by improper operation of the driver, which increases fuel consumption and damages the tire.

三是制止后轮翘起。因为装载机的掘起力大，驾驭员通常在铲挖坚实的原土和石料山等作业进程中，假如操作不妥就简单呈现两后轮翘起离地表象。这种翘起动作的落地惯性，会形成铲斗的刃板开裂、铲斗变形；后轮翘起很高时还简单引起前后机架等构造的焊接处开裂，乃板材开裂等。

Third, stop the rear wheels from cocking up. Because of the great digging force of the loader, the driver usually shows the appearance of two rear wheels lifting off the ground in case of improper operation in the process of digging solid original soil and stone hill. The landing inertia of the lifting action will cause the blade of the bucket to crack and the bucket to deform; When the rear wheel is tilted very high, it also simply causes cracks at the welding points of the front and rear frames and other structures, and even plate cracks.

四是制止撞击料堆。铲挖普通物料，装载机可以用II档（七速档变速箱，三速档变速箱制止用二档）作业，制止以II档以上的档位向料堆进行惯性冲击。准确的办法应该是铲斗在挨近料堆时及时地转换为I档完结一个铲料进程。   在驾驭装载机进程中，机手要养成杰出的操作习气，不只关于机器有利，可以取得机主的赞赏，还能给本身的加上保证，让您的作业既轻松又风趣。

The fourth is to prevent the impact on the material pile. For shoveling ordinary materials, the loader can operate with gear II (seven speed gearbox, three speed gearbox stop with gear II) to stop inertial impact on the pile with gear above gear II. The accurate method should be to timely convert the bucket to gear I when it is close to the material pile to complete a shoveling process. In the process of controlling the loader, the operator should develop outstanding operating habits, not only about the advantages of the machine, but also about the appreciation of the owner, and also to ensure their own safety, so that your work is easy and interesting.

以上就是为大家介绍的有关矿井装载机的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.kuangjingjixie.com

The above is a detailed introduction to the mine loader, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://www.kuangjingjixie.com