For the tunnel loader, if there is a problem with the tire, it will directly lead to the inability to continue to work, or even can only continue to work after replacement. So it is very important for us to replace the tire quickly. Today, Xiaobian will introduce the method of rapid tire change of explosion-proof loader.

防爆装载机快速换胎的方法

Rapid tire changing method of explosion-proof loader

（1）启动机器，就近寻找一块比较平坦开阔的场地，压下动臂升降杆，利用动臂支承使前轮离地，然后用支架支撑在闪桥靠近爆胎的一侧，并将后轮楔好。

(1) Start the machine, find a flat and open place nearby, press down the boom lifting rod, use the boom support to lift the front wheel off the ground, then support it on the side of the flash bridge close to the flat tire with a support, and wedge the rear wheel.

（2）利用撬杠等工具，拆卸挡圈及锁圈然后检查轮胎衬垫与轮辋外表面是否粘连，轮胎使用时间较长，衬垫与轮辋外表面可发生粘连。若发生可撤掉支撑物，使机器在短距离内慢速往复运行，直衬垫与轮辋外表面脱离。

(2) Use crowbar and other tools to remove the retaining ring and lock ring, and then check whether the tire pad is adhered to the outer surface of the rim. If the tire is used for a long time, the pad may be adhered to the outer surface of the rim. If any, remove the support and make the machine run back and forth slowly in a short distance until the gasket is separated from the outer surface of the rim.

（3）防爆装载机外胎被钉子等细长异物扎伤后，若表面无明显创口或创口较小，则此外胎可继续使用。而若创口较大，则需要进行修补，因为机器运行时，轮胎受挤压磨擦，时间一长就会损坏内胎，甚创口越来越大、内胎突出，造成轮胎报废。

(3) After the outer tire of explosion-proof loader is stabbed by slender foreign bodies such as nails, if there is no obvious wound on the surface or the wound is small, the outer tire can continue to be used. If the wound is large, it needs to be repaired, because when the machine is running, the tire is squeezed and rubbed, and the inner tube will be damaged over a long time, and even the wound becomes larger and larger, and the inner tube protrudes, resulting in tire scrapping.

本文由隧道装载机为您提供，我们的网站是：http://www.kuangjingjixie.com我们将以全心全意的热情为您提供服务，欢迎您的访问

This article is provided by tunnel loader. Our website is: http://www.kuangjingjixie.com We will provide you with services with wholehearted enthusiasm. Welcome to visit